How to Use IMMO Universal Decoding 3.2 to Remove IMMO Code of ECUs
IMMO Universal Decoding 3.2 is a software that can help you to remove the IMMO code of ECUs (Engine Control Units) of various car models. IMMO code is a security feature that prevents the car from starting without the correct key or immobilizer device. If you need to repair or replace your ECU, you may need to remove the IMMO code first.
In this article, we will show you how to use IMMO Universal Decoding 3.2 to remove the IMMO code of ECUs. You will need a programmer device that can read and write the ECU data, such as UPA-USB, WELLON Series VP/GP, Galep, Serial and many others[^1^]. You will also need to download and install the software from a reliable source[^2^].
Step 1: Copy the software folder to your computer
After downloading the software, you need to copy the folder to your computer. You can choose any location that you prefer, but we recommend to copy it to C:/IUDv3.2 for convenience.
Immo Universal Decoder V3 2 Torrent
Download Zip: https://bltlly.com/2tGYHY
Step 2: Generate a license key
Before you can use the software, you need to generate a license key based on your computer's hardware ID. To do this, follow these steps:
Run HWIDGen.exe from the software folder and click \"copy\". This will copy your hardware ID to the clipboard.
Open the \"Crack\" folder and run IUDKeygen.exe.
Paste your hardware ID in the \"HW-ID\" box and press \"Generate License\". This will create a file called lic.key in the same folder.
Copy lic.key from the \"Crack\" folder to the software folder (C:/IUDv3.2).
Step 3: Load and repair the ECU data file
Now you are ready to use the software to remove the IMMO code of your ECU. To do this, follow these steps:
Connect your programmer device to your computer and read the ECU data file. Save it as a BIN format file.
Run IMMDEC3.EXE from the software folder.
Select your vehicle manufacturer from the list.
Select your ECU or control module chip type from the list.
Click \"Open\" and browse to your ECU data file.
Click \"Repair\" and confirm by clicking \"Yes\". The software will remove the IMMO code from your ECU data file and save it as a new file with \"_IMMO_OFF\" suffix.
Step 4: Write the repaired ECU data file
The last step is to write the repaired ECU data file back to your ECU using your programmer device. Follow the instructions of your programmer device to do this. After writing the file, you can test your ECU and start your car without any IMMO code problem.
IMMO Universal Decoding 3.2 is a useful software that can help you to remove the IMMO code of ECUs of various car models. It is compatible with many programmer devices and supports over 10000 models of cars. It is easy to use and has a user-friendly interface. However, you should be careful when using this software, as it may void your warranty or cause damage to your ECU or car if not done properly. You should always backup your original ECU data file before making any changes. You should also consult a professional if you are not sure about what you are doing. 0efd9a6b88